- Thread starter Tuna
- Start date
Audiacious
New Member
Is it possible to use the second nic on a pc to directly connect to second pc to stream to? I ask because don't have ethernet connection to second pc from router but do have a second nic on gaming pc
Tuna
Member
Should be possible.
Ryan Ellerbe
New Member
So when I add a teleport on the second pc it adds teleport audio to all my scenes but some of my scenes I don't want the audio from teleport. If I mute it in one scene it mutes it in all my scenes, how do I get around this?
TomCatT
New Member
You could split up all of your audio sources in OBS and assign them to different channels. Then on the second system, you could turn off what you don't want to hear. You can get on YouTube and learn how to separate the different audio channels. Hope this helps.
Tuna
Member
If there was no significant lag on the network it should not happen. If you are checking via audio monitoring, check your recording or stream. Audio monitoring in my experience is not always right.
Tuna
Member
Consciouscommander
New Member
Do you have a working version of obs teleport for macOS sonoma?
Tuna
Member
only for x86. See https://github.com/fzwoch/obs-teleport/issues/43
slashie101
New Member
Hello there, thank you so much for the plugin!
I'm currently having an issue where the plugin only works if I disable my private network firewall entirely on both PCs, even though OBS is listed as allowing to communicate on private networks. Do you have any suggestions for why Teleport isn't able to communicate through the private network despite OBS being allowed? Is there a sub process I need to allow as well?
I'm currently having an issue where the plugin only works if I disable my private network firewall entirely on both PCs, even though OBS is listed as allowing to communicate on private networks. Do you have any suggestions for why Teleport isn't able to communicate through the private network despite OBS being allowed? Is there a sub process I need to allow as well?
slashie101
New Member
The teleport source is correctly listed, it just doesn't display anything
Tuna
Member
Then perhaps you need to punch a hole in the FW and set a static port for the Teleport output. Or someones actually knows what Windows FW is actually doing..
slashie101
New Member
For anybody else with this issue: I needed to add an inbound rule for the specific port used on the gaming PC
Hello, i got error message "Status_wait_2" and when i click ok obs crached
OBS 30.0.0
Teleport 0.7.0
log file:
21:46:36.389: [Safe Mode] Unclean shutdown detected!
21:46:40.446: [Safe Mode] User elected to launch normally.
21:46:40.447: CPU Name: 13th Gen Intel(R) Core(TM) i7-13700K
21:46:40.447: CPU Speed: 3418MHz
21:46:40.447: Physical Cores: 16, Logical Cores: 24
21:46:40.447: Physical Memory: 65300MB Total, 48393MB Free
21:46:40.447: Windows Version: 10.0 Build 22631 (release: 23H2; revision: 3007; 64-bit)
21:46:40.447: Running as administrator: true
21:46:40.447: Windows 10/11 Gaming Features:
21:46:40.447: Game Bar: On
21:46:40.447: Game DVR: On
21:46:40.447: Game DVR Background Recording: Off
21:46:40.448: Game Mode: Probably On (no reg key set)
21:46:40.449: Sec. Software Status:
21:46:40.450: Microsoft Defender Antivirus: enabled (AV)
21:46:40.450: Windows Firewall: enabled (FW)
21:46:40.451: Current Date/Time: 2024-01-24, 21:46:40
21:46:40.451: Browser Hardware Acceleration: true
21:46:40.451: Hide OBS windows from screen capture: false
21:46:40.451: Qt Version: 6.5.3 (runtime), 6.5.3 (compiled)
21:46:40.451: Portable mode: false
21:46:40.535: OBS 30.0.0 (64-bit, windows)
21:46:40.535: ---------------------------------
21:46:40.536: ---------------------------------
21:46:40.536: audio settings reset:
21:46:40.536: samples per sec: 48000
21:46:40.536: speakers: 2
21:46:40.536: max buffering: 960 milliseconds
21:46:40.536: buffering type: dynamically increasing
21:46:40.537: ---------------------------------
21:46:40.537: Initializing D3D11...
21:46:40.537: Available Video Adapters:
21:46:40.546: Adapter 0: NVIDIA GeForce RTX 3090
21:46:40.546: Dedicated VRAM: 25522339840 (23.8 GiB)
21:46:40.546: Shared VRAM: 34236358656 (31.9 GiB)
21:46:40.546: PCI ID: 10de:2204
21:46:40.546: HAGS Status: Enabled (Default: No, Driver status: Supported)
21:46:40.546: Driver Version: 31.0.15.4633
21:46:40.546: output 0:
21:46:40.546: name=C27HG7x
21:46:40.546: pos={0, 0}
21:46:40.546: size={2560, 1440}
21:46:40.546: attached=true
21:46:40.546: refresh=144
21:46:40.546: bits_per_color=8
21:46:40.546: space=RGB_FULL_G22_NONE_P709
21:46:40.546: sdr_white_nits=80
21:46:40.546: nit_range=[min=0.010000, max=240.000000, max_full_frame=240.000000]
21:46:40.546: dpi=96 (100%)
21:46:40.546: id=\\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:40.546: alt_id=\\.\DISPLAY1
21:46:40.548: Loading up D3D11 on adapter NVIDIA GeForce RTX 3090 (0)
21:46:40.632: D3D11 loaded successfully, feature level used: b000
21:46:40.632: DXGI increase maximum frame latency success
21:46:40.632: Hardware-Accelerated GPU Scheduling enabled on adapter!
21:46:40.633: D3D11 GPU priority setup success
21:46:40.787: ---------------------------------
21:46:40.787: video settings reset:
21:46:40.787: base resolution: 2560x1440
21:46:40.787: output resolution: 1920x1080
21:46:40.787: downscale filter: Lanczos
21:46:40.787: fps: 60/1
21:46:40.787: format: NV12
21:46:40.787: YUV mode: Rec. 709/Full
21:46:40.787: NV12 texture support enabled
21:46:40.787: P010 texture support not available
21:46:40.788: Audio monitoring device:
21:46:40.788: name: Output 1/2 (Komplete Audio 6 MK2)
21:46:40.788: id: {0.0.0.00000000}.{daae8a16-c8e6-4f2b-a66b-66054006b373}
21:46:40.788: ---------------------------------
21:46:40.790: No AJA devices found, skipping loading AJA UI plugin
21:46:40.790: Failed to initialize module 'aja-output-ui.dll'
21:46:40.791: No AJA devices found, skipping loading AJA plugin
21:46:40.791: Failed to initialize module 'aja.dll'
21:46:40.792: Skipping module '../../obs-plugins/64bit/chrome_elf.dll', not an OBS plugin
21:46:40.794: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
21:46:40.794: Failed to load 'en-US' text for module: 'decklink-captions.dll'
21:46:40.795: Failed to load 'en-US' text for module: 'decklink-output-ui.dll'
21:46:40.804: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
21:46:40.804: Failed to initialize module 'decklink.dll'
21:46:40.819: Skipping module '../../obs-plugins/64bit/libcef.dll', not an OBS plugin
21:46:40.819: Skipping module '../../obs-plugins/64bit/libEGL.dll', not an OBS plugin
21:46:40.820: Skipping module '../../obs-plugins/64bit/libGLESv2.dll', not an OBS plugin
21:46:40.831: [obs-browser]: Version 2.22.1
21:46:40.831: [obs-browser]: CEF Version 103.0.5060.134 (runtime), 103.0.0-5060-shared-textures.2594+gc69ad37+chromium-103.0.5060.134 (compiled)
21:46:40.835: NVENC supported
21:46:41.493: [NVENC] AV1 is not supported
21:46:41.494: [noise suppress]: NVIDIA denoiser disabled, redistributable not found or could not be loaded.
21:46:41.495: Failed to get NVVideoEffects.dll version info size
21:46:41.495: [NVIDIA VIDEO FX]: FX disabled, redistributable not found or could not be loaded.
21:46:41.540: [obs-teleport] version: 0.7.0
21:46:41.545: [obs-websocket] [obs_module_load] you can haz websockets (Version: 5.3.3 | RPC Version: 1)
21:46:41.545: [obs-websocket] [obs_module_load] Qt version (compile-time): 6.5.3 | Qt version (run-time): 6.5.3
21:46:41.545: [obs-websocket] [obs_module_load] Linked ASIO Version: 102800
21:46:41.558: [obs-websocket] [obs_module_load] Module loaded.
21:46:41.561: [rtmp-services plugin] Remote update of URL "https://obsproject.com/obs2_update/rtmp-services/v5/package.json" failed: getaddrinfo() thread failed to start
21:46:41.563: [vlc-video]: VLC 3.0.20 Vetinari found, VLC video source enabled
21:46:41.565: [win-capture plugin] Remote update of URL "https://obsproject.com/obs2_update/win-capture/v1/package.json" failed: getaddrinfo() thread failed to start
21:46:41.570: ---------------------------------
21:46:41.570: Loaded Modules:
21:46:41.570: win-wasapi.dll
21:46:41.570: win-dshow.dll
21:46:41.570: win-capture.dll
21:46:41.570: vlc-video.dll
21:46:41.570: text-freetype2.dll
21:46:41.570: rtmp-services.dll
21:46:41.570: obs-x264.dll
21:46:41.570: obs-websocket.dll
21:46:41.570: obs-webrtc.dll
21:46:41.570: obs-vst.dll
21:46:41.570: obs-transitions.dll
21:46:41.570: obs-text.dll
21:46:41.570: obs-teleport.dll
21:46:41.570: obs-qsv11.dll
21:46:41.570: obs-outputs.dll
21:46:41.570: obs-filters.dll
21:46:41.570: obs-ffmpeg.dll
21:46:41.570: obs-browser.dll
21:46:41.570: image-source.dll
21:46:41.570: frontend-tools.dll
21:46:41.570: decklink-output-ui.dll
21:46:41.570: decklink-captions.dll
21:46:41.570: coreaudio-encoder.dll
21:46:41.570: ---------------------------------
21:46:41.570: QWidget::setTabOrder: 'first' and 'second' must be in the same window
21:46:41.570: ==== Startup complete ===============================================
21:46:41.646: All scene data cleared
21:46:41.646: ------------------------------------------------
21:46:41.653: [win-wasapi: 'Desktop Audio'] update settings:
21:46:41.653: device id: {0.0.0.00000000}.{daae8a16-c8e6-4f2b-a66b-66054006b373}
21:46:41.653: use device timing: 1
21:46:41.655: [Loaded global audio device]: 'Desktop Audio'
21:46:41.656: [win-wasapi: 'Mic/Aux'] update settings:
21:46:41.656: device id: default
21:46:41.656: use device timing: 0
21:46:41.657: [Loaded global audio device]: 'Mic/Aux'
21:46:41.659: [duplicator-monitor-capture: 'Display Capture'] update settings:
21:46:41.659: display: C27HG7x (2560x1440)
21:46:41.659: cursor: false
21:46:41.659: method: DXGI
21:46:41.659: id: \\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:41.659: alt_id: \\.\DISPLAY1
21:46:41.659: setting_id: \\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:41.659: force SDR: false
21:46:41.663: Switched to scene 'Scene'
21:46:41.663: ------------------------------------------------
21:46:41.663: Loaded scenes:
21:46:41.663: - scene 'Scene':
21:46:41.663: - source: 'Desktop Audio' (wasapi_output_capture)
21:46:41.663: - source: 'Display Capture' (monitor_capture)
21:46:41.663: ------------------------------------------------
21:46:41.668: WASAPI: Device 'Output 1/2 (Komplete Audio 6 MK2)' [44100 Hz] initialized (source: Desktop Audio)
21:46:41.671: WASAPI: Device 'Microphone (Wireless Stereo Headset)' [16000 Hz] initialized (source: Mic/Aux)
21:46:41.857: WhatsNewInfoThread::run: Failed to fetch whatsnew file: getaddrinfo() thread failed to start
OBS 30.0.0
Teleport 0.7.0
log file:
21:46:36.389: [Safe Mode] Unclean shutdown detected!
21:46:40.446: [Safe Mode] User elected to launch normally.
21:46:40.447: CPU Name: 13th Gen Intel(R) Core(TM) i7-13700K
21:46:40.447: CPU Speed: 3418MHz
21:46:40.447: Physical Cores: 16, Logical Cores: 24
21:46:40.447: Physical Memory: 65300MB Total, 48393MB Free
21:46:40.447: Windows Version: 10.0 Build 22631 (release: 23H2; revision: 3007; 64-bit)
21:46:40.447: Running as administrator: true
21:46:40.447: Windows 10/11 Gaming Features:
21:46:40.447: Game Bar: On
21:46:40.447: Game DVR: On
21:46:40.447: Game DVR Background Recording: Off
21:46:40.448: Game Mode: Probably On (no reg key set)
21:46:40.449: Sec. Software Status:
21:46:40.450: Microsoft Defender Antivirus: enabled (AV)
21:46:40.450: Windows Firewall: enabled (FW)
21:46:40.451: Current Date/Time: 2024-01-24, 21:46:40
21:46:40.451: Browser Hardware Acceleration: true
21:46:40.451: Hide OBS windows from screen capture: false
21:46:40.451: Qt Version: 6.5.3 (runtime), 6.5.3 (compiled)
21:46:40.451: Portable mode: false
21:46:40.535: OBS 30.0.0 (64-bit, windows)
21:46:40.535: ---------------------------------
21:46:40.536: ---------------------------------
21:46:40.536: audio settings reset:
21:46:40.536: samples per sec: 48000
21:46:40.536: speakers: 2
21:46:40.536: max buffering: 960 milliseconds
21:46:40.536: buffering type: dynamically increasing
21:46:40.537: ---------------------------------
21:46:40.537: Initializing D3D11...
21:46:40.537: Available Video Adapters:
21:46:40.546: Adapter 0: NVIDIA GeForce RTX 3090
21:46:40.546: Dedicated VRAM: 25522339840 (23.8 GiB)
21:46:40.546: Shared VRAM: 34236358656 (31.9 GiB)
21:46:40.546: PCI ID: 10de:2204
21:46:40.546: HAGS Status: Enabled (Default: No, Driver status: Supported)
21:46:40.546: Driver Version: 31.0.15.4633
21:46:40.546: output 0:
21:46:40.546: name=C27HG7x
21:46:40.546: pos={0, 0}
21:46:40.546: size={2560, 1440}
21:46:40.546: attached=true
21:46:40.546: refresh=144
21:46:40.546: bits_per_color=8
21:46:40.546: space=RGB_FULL_G22_NONE_P709
21:46:40.546: sdr_white_nits=80
21:46:40.546: nit_range=[min=0.010000, max=240.000000, max_full_frame=240.000000]
21:46:40.546: dpi=96 (100%)
21:46:40.546: id=\\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:40.546: alt_id=\\.\DISPLAY1
21:46:40.548: Loading up D3D11 on adapter NVIDIA GeForce RTX 3090 (0)
21:46:40.632: D3D11 loaded successfully, feature level used: b000
21:46:40.632: DXGI increase maximum frame latency success
21:46:40.632: Hardware-Accelerated GPU Scheduling enabled on adapter!
21:46:40.633: D3D11 GPU priority setup success
21:46:40.787: ---------------------------------
21:46:40.787: video settings reset:
21:46:40.787: base resolution: 2560x1440
21:46:40.787: output resolution: 1920x1080
21:46:40.787: downscale filter: Lanczos
21:46:40.787: fps: 60/1
21:46:40.787: format: NV12
21:46:40.787: YUV mode: Rec. 709/Full
21:46:40.787: NV12 texture support enabled
21:46:40.787: P010 texture support not available
21:46:40.788: Audio monitoring device:
21:46:40.788: name: Output 1/2 (Komplete Audio 6 MK2)
21:46:40.788: id: {0.0.0.00000000}.{daae8a16-c8e6-4f2b-a66b-66054006b373}
21:46:40.788: ---------------------------------
21:46:40.790: No AJA devices found, skipping loading AJA UI plugin
21:46:40.790: Failed to initialize module 'aja-output-ui.dll'
21:46:40.791: No AJA devices found, skipping loading AJA plugin
21:46:40.791: Failed to initialize module 'aja.dll'
21:46:40.792: Skipping module '../../obs-plugins/64bit/chrome_elf.dll', not an OBS plugin
21:46:40.794: [CoreAudio encoder]: CoreAudio AAC encoder not installed on the system or couldn't be loaded
21:46:40.794: Failed to load 'en-US' text for module: 'decklink-captions.dll'
21:46:40.795: Failed to load 'en-US' text for module: 'decklink-output-ui.dll'
21:46:40.804: A DeckLink iterator could not be created. The DeckLink drivers may not be installed
21:46:40.804: Failed to initialize module 'decklink.dll'
21:46:40.819: Skipping module '../../obs-plugins/64bit/libcef.dll', not an OBS plugin
21:46:40.819: Skipping module '../../obs-plugins/64bit/libEGL.dll', not an OBS plugin
21:46:40.820: Skipping module '../../obs-plugins/64bit/libGLESv2.dll', not an OBS plugin
21:46:40.831: [obs-browser]: Version 2.22.1
21:46:40.831: [obs-browser]: CEF Version 103.0.5060.134 (runtime), 103.0.0-5060-shared-textures.2594+gc69ad37+chromium-103.0.5060.134 (compiled)
21:46:40.835: NVENC supported
21:46:41.493: [NVENC] AV1 is not supported
21:46:41.494: [noise suppress]: NVIDIA denoiser disabled, redistributable not found or could not be loaded.
21:46:41.495: Failed to get NVVideoEffects.dll version info size
21:46:41.495: [NVIDIA VIDEO FX]: FX disabled, redistributable not found or could not be loaded.
21:46:41.540: [obs-teleport] version: 0.7.0
21:46:41.545: [obs-websocket] [obs_module_load] you can haz websockets (Version: 5.3.3 | RPC Version: 1)
21:46:41.545: [obs-websocket] [obs_module_load] Qt version (compile-time): 6.5.3 | Qt version (run-time): 6.5.3
21:46:41.545: [obs-websocket] [obs_module_load] Linked ASIO Version: 102800
21:46:41.558: [obs-websocket] [obs_module_load] Module loaded.
21:46:41.561: [rtmp-services plugin] Remote update of URL "https://obsproject.com/obs2_update/rtmp-services/v5/package.json" failed: getaddrinfo() thread failed to start
21:46:41.563: [vlc-video]: VLC 3.0.20 Vetinari found, VLC video source enabled
21:46:41.565: [win-capture plugin] Remote update of URL "https://obsproject.com/obs2_update/win-capture/v1/package.json" failed: getaddrinfo() thread failed to start
21:46:41.570: ---------------------------------
21:46:41.570: Loaded Modules:
21:46:41.570: win-wasapi.dll
21:46:41.570: win-dshow.dll
21:46:41.570: win-capture.dll
21:46:41.570: vlc-video.dll
21:46:41.570: text-freetype2.dll
21:46:41.570: rtmp-services.dll
21:46:41.570: obs-x264.dll
21:46:41.570: obs-websocket.dll
21:46:41.570: obs-webrtc.dll
21:46:41.570: obs-vst.dll
21:46:41.570: obs-transitions.dll
21:46:41.570: obs-text.dll
21:46:41.570: obs-teleport.dll
21:46:41.570: obs-qsv11.dll
21:46:41.570: obs-outputs.dll
21:46:41.570: obs-filters.dll
21:46:41.570: obs-ffmpeg.dll
21:46:41.570: obs-browser.dll
21:46:41.570: image-source.dll
21:46:41.570: frontend-tools.dll
21:46:41.570: decklink-output-ui.dll
21:46:41.570: decklink-captions.dll
21:46:41.570: coreaudio-encoder.dll
21:46:41.570: ---------------------------------
21:46:41.570: QWidget::setTabOrder: 'first' and 'second' must be in the same window
21:46:41.570: ==== Startup complete ===============================================
21:46:41.646: All scene data cleared
21:46:41.646: ------------------------------------------------
21:46:41.653: [win-wasapi: 'Desktop Audio'] update settings:
21:46:41.653: device id: {0.0.0.00000000}.{daae8a16-c8e6-4f2b-a66b-66054006b373}
21:46:41.653: use device timing: 1
21:46:41.655: [Loaded global audio device]: 'Desktop Audio'
21:46:41.656: [win-wasapi: 'Mic/Aux'] update settings:
21:46:41.656: device id: default
21:46:41.656: use device timing: 0
21:46:41.657: [Loaded global audio device]: 'Mic/Aux'
21:46:41.659: [duplicator-monitor-capture: 'Display Capture'] update settings:
21:46:41.659: display: C27HG7x (2560x1440)
21:46:41.659: cursor: false
21:46:41.659: method: DXGI
21:46:41.659: id: \\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:41.659: alt_id: \\.\DISPLAY1
21:46:41.659: setting_id: \\?\DISPLAY#SAM0E16#5&cb01776&0&UID4357#{e6f07b5f-ee97-4a90-b076-33f57bf4eaa7}
21:46:41.659: force SDR: false
21:46:41.663: Switched to scene 'Scene'
21:46:41.663: ------------------------------------------------
21:46:41.663: Loaded scenes:
21:46:41.663: - scene 'Scene':
21:46:41.663: - source: 'Desktop Audio' (wasapi_output_capture)
21:46:41.663: - source: 'Display Capture' (monitor_capture)
21:46:41.663: ------------------------------------------------
21:46:41.668: WASAPI: Device 'Output 1/2 (Komplete Audio 6 MK2)' [44100 Hz] initialized (source: Desktop Audio)
21:46:41.671: WASAPI: Device 'Microphone (Wireless Stereo Headset)' [16000 Hz] initialized (source: Mic/Aux)
21:46:41.857: WhatsNewInfoThread::run: Failed to fetch whatsnew file: getaddrinfo() thread failed to start
Nevemind fixed by installing NDI 5 Runtime :D
Tuna
Member
That seems to be the OBS update checker. Unrelated to Teleport.
KattPhloxworthy
Member
Some third-party firewalls, such as Comodo's, do not handle multicast properly. I had to remove it on any computer receiving Teleport streams so it could work properly.
--Katt. =^.^=
Hello I really enjoy using teleport been working flawlessly for weeks. Unfortunately it stopped working for me randomly today when I haven't changed anything about my setup. I am able to see and choose my gaming pc in the teleport source but it won't transfer my audio and video from the game pc to stream pc despite the source saying that it is connected. I tried the opposite and had my stream pc be the output and there is no problems that way. I have tried all the fixes that ppl have said had to do with the firewall and none of them worked. I also tried using my gaming pc as the output and source just to see if my audio and game could still be transferred and it works fine when through the same pc. So I was just curious what other fixes I could do? I'm on version 30.0.2 of obs if that helps. Maybe I need to downgrade? Or is anyone else having problems with obs teleport suddenly today?